INTEGRATED MAIN FRAME Using a pillow-block supported integral main frame that has been reinforced, it absorbs twisting loads during backhoe operation and will not transmit flex to the tractor chassis. This makes the structural integrity of the B21 uncompromisingly sound, giving you a firmer ride and a structurally solid vehicle that will do its job and do it with ease.

TRANSPORTING THIS MEGA-WORKER IS EASY Since the B21 loader with backhoe weighs only 3836 lbs* (1740kg), it’s easily transported by a ¾ton pick-up truck and a trailer rated 10,000 lbs. GVWR, which requires only a C Class license in most states. (*Weights may vary due to options available.)

HST (HYDROSTATIC TRANSMISSION)
The tractor’s superb maneuverability comes from our hydrostatic transmission and 4WD system. A single pedal controls both speed and direction changes quickly and without shifting or clutching. This is especially helpful when working in tight spaces.

ENGINE The B21 has a 21 horsepower (gross) E-TVCS diesel engine, which meets EPA emissions regulations and also uses special internal balancers for low-noise levels and low vibration. The powerful and tenacious engine starts quickly and is environmentally friendly as well.

HARD-NOSE SLANTED HOOD AND FRONT GUARD Gain an unobstructed view of what lies ahead, thanks to the hard-nose slanted hood. The loader bucket is easy to see in the down position and the front-grill guard helps to protect the hood and engine components from any type of impact.

4WD Standard with this feature-packed tractor is 4WD, giving you greater pulling power as well as less slippage. This provides you with virtually unstoppable performance even in difficult conditions and varying terrain. This feature is especially helpful during loader operations.

MAXIMUM ROLLBACK DUMP ANGLES Rotation achieved from the 4-bar linkage system reaches 44°of rollback and 45°of dump angle. These angles mean you can fill and dump buckets easier and faster, maximizing your productivity.

FRONT LOADER With a lifting capacity of 926 lbs. (420kg) and a maximum height of 7.4 feet (2255mm) to the pivot pins, the front loader can tackle just about any job with ease.

METAL BUSHINGS Replaceable bushings are incorporated into the design and are strategically located at the pivot points to allow you to economically replace and maintain a like-new fit.

ONE TOUCH REVERSE HIGH-BACK SEAT The B21 offers a high-back deluxe seat that provides daylong comfort and reduced operator fatigue. It also adjusts forward or backward with just a touch and can be quickly reversed for backhoe operation.

PTO The live, continuous-running, 540-rpm PTO expands the use of this tractor to include rear mounted PTO driven implements such as rotary tillers, post hole diggers, snow blowers and rear mount mowers, just to name a few.

BACKHOE With a digging depth of 7.5 feet (2 foot flat bottom), it’s able to handle an expanded variety of jobs efficiently.

20OANGLE OF DEPARTURE High ground clearance provides a generous angle of departure. This allows the B21 to load quickly and easily onto a trailer and will help prevent you from damaging curbs while moving from job to job.

QUICK-MOUNT ATTACH/DETACH  Featuring a four-point mount, quick attach system, the backhoe can be removed and installed easily.

CAT I, 3-POINT HITCH The lifting force of the CAT I, 3-point hitch is 2315 lbs (1050 kg) 24 inches behind the lift points, allowing you to use a wide variety of implements. The responsive position control lever ensures accurate and smooth 3-point positioning and includes cushion relief protection.

ROPS/FOPS AND COMBINATION HEADLIGHTS/WORK LIGHTS The 4-post Roll-Over Protective Structure and the Falling Object Protective Structure come standard, to help keep you safe from any potential risks. Plus, your headlights are mounted high, allowing for a bigger area of night coverage. (The rear work lights are optional as displayed.)

HEAVY-DUTY REAR AXLE The heavy-duty rear axle incorporates planetary final drives to handle heavy torque loads, and uses multiple wet-disc brakes for extended life and smooth stopping performance.

FEATHER STEP TMHST The “Feather Step”HST ease of operation is due to the hydraulic servo that gives you improved control by reducing the amount of pedal pressure needed to depress the HST pedal. Forward and reverse movements are easy when using the loader. And, regardless of the load, you will not experiencesudden pedal pressure changes. Operation is smooth even when making sudden stops or directional changes as well.

INTEGRATED MAIN FRAMEUsing a pillow-block supported integral main frame that has been reinforced, it absorbs twisting loads during backhoe operation and will not transmit flex to the tractor chassis. This makes the structural integrity of the L48 uncompromisingly sound, giving you a firmer ride and a structurally solid vehicle that will do its job and do it with ease.

ENGINE The L48 has a 48 horsepower (gross) E-TVCS diesel engine which meets EPA emissions regulations and also uses special internal balancers for low-noise levels and low vibration. The powerful and tenacious engine starts quickly and is environmentally friendly as well.

HARD-NOSE SLANTED HOOD AND FRONT GUARD Gain an unobstructed view of what lies ahead, thanks to the hard-nose slanted hood. The loader bucket is easy to see in the down position and the front-grill guard helps to protect the hood and engine components from any type of impact.

CONCEALED MUFFLER WITH SPARK ARRESTER No large, obstructing exhaust stack to impair your forward vision. We’ve tucked it away, so all you see is the work area ahead of you. In addition, a spark arrester is standard allowing for work in areas requiring this feature.

4WD Standard with this feature-packed tractor is 4WD, giving you greater pulling power as well as less slippage. This provides you with virtually unstoppable performance even in difficult conditions and varyingterrain. This feature is especially helpful during loader operations.

JOYSTICK CONTROL Using only the single joystick lever, you easily control multiple functions such as raising or lowering the boom, bucket dump, bucket rollback, or even combining the functions to increase productivity. Also, we’ve designed into our performance matched system a regenerative circuit that allows for faster dump cycles.

AUTOMATIC HYDRAULIC SELF-LEVELING SYSTEM An exclusive feature for this class of tractor. By simply movingthe joystick to the “Up”or “Down”position, the bucket angle is automatically kept the same at any angle as the boom is raised or lowered, thanks to the self-leveling valve. This minimizes spillage prior to dumping and makes the loader easier to operate. It’s very useful especially when using pallet forks.

METAL BUSHING Replaceable bushings are incorporated into the design and are strategically located at the pivot points to allow you to economically replace and maintain a like-new fit.

SKID STEER-TYPE QUICK HITCH This cost-effective option is offered to give you the convenience of rapid attachment change-over using basic tools you may already own.

BACKHOE With a digging depth of 11.1 feet (2 ft. flat bottom), it’s able to handle an expanded variety of jobs efficiently. A dedicated pump for the boom swing makes for smooth, precise, and controlled operation. Still, more versatility is provided by the 4-point backhoe quick-mount system which expands the L48’s capabilities and allows you to maximize the return on your investment.

FEATURESREVERSIBLE SEAT The seat reverses on the spot, so you can operate the backhoe with simplicity. A convenient walk-through platform eliminates climbing over the seat or dismounting the tractor. Now, just reverse the seat, step in, and you’re ready to work. It’s that easy. Plus, the seat is designed to rotate 15 degrees to the right, providing the best position when using rear implements such as our Top-N-Tilt System with a box scraper.

20O ANGLE OF DEPARTURE High ground clearance provides a generous angle of departure. This allows the L48 to load quickly and easily onto a trailer and will help prevent you from damaging curbs while moving from job to job.

STARTER SWITCH The new location of the starter switch makes it easy to start the engine while in the backhoe operating position. No need to reacharound and fumble for the standard switch either. We've put it right next to you.

MULTIPLE PUMP SYSTEM A new feature on the L48 is the swing-raise-lower functions can be performed simultaneously, thanks to the dedicated swing pump. Precise and smooth positioning is easily accomplished using the inching spool.

PTO The live, continuous-running, 540-rpm PTO expands the use of this tractor to include rear mounted PTO driven implements such as rotary tillers, post hole diggers, snow blowers and rear mount mowers, just to name a few.

QUICK-MOUNT ATTACH/DETACH Featuring a four-point mount, quick attach system, the backhoe can be removed and installed easily.

DRAW BAR (optional flat-bar type)This allows you to attach a trailer to the L48 to shuttle cargo to and from work sites.

CATEGORY I, 3-POINT HITCH The lifting force of the CAT. I, 3-point hitch is 3,310lbs (1,500kg) 24 inches behind the lift points, allowing you to use a wide variety of implements. The responsive position control lever ensures accurate and smooth 3-point positioning and includes cushion relief protection.