Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland Discbine® 316 (flail)
Discbine® 316 (flail)
Discbine Disc Mower-Conditioners
CLOSER CUTTING, FASTER DRYDOWN, INCREASED DURABILITY
New Holland has taken the Discbine® mower-conditioner to a new level with two new center-pivot models. Combining both speed and performance, the new Discbine® 313 and Discbine® 316 feature increased durability, more efficient crop flow and smoother, more effective conditioning.
LARGER DISCS, WIDER CONDITIONING
The combination of larger cutting discs and a wider conditioning system leads to cleaner cutting, better crop flow and more consistent drying. Co-rotating disc modules have been removed on the Discbine 313 and reduced to one pair on the Discbine 316. This greatly reduces the crop convergence between the cutterbar and the conditioner.
IMPROVED FLOTATION
Improved header attaching link geometry contributes to more responsive flotation. The rear pivot points of the header attaching links are lower than the pivot points on the front, ensuring the header moves up and back should you encounter an obstacle. In addition, the upper end of the flotation springs are anchored with a ball-and-socket arrangement that eliminates any binding as the header moves through its flotation range.
| Model | Discbine® 316 (flail) |
| New Holland-Disc Cutterbar | |
| Type | MowMax™ II True Modular Disc Cutterbar |
| Width of Cut, ft. in. (m) | 16' 3'' (4.95) |
| Number of discs | 10 |
| Number of knives | 20 (2 per disc) |
| Disc Speed, rpm | 2,250 |
| Cutting angle | 2 to 10 degrees |
| Hydraulic Cutting angle control | |
| Standard Cutting height skid shoe, in. (mm) | 0.79-2.07 (20-69) |
| Fixed Raised, high-stubble skid shoe | .79-5.75 (20- 146) |
| Adjustable Raised, high-stubble skid shoe | 3-5.5 (76 - 140) |
| BioMass skid shoe | 5-7.75 (127- 197) |
| Ground clearance with header fully raised, in. (mm) | 16.2" (411) |
| Cutterbar Flotation | Vertical and lateral, adjustable springs |
| QuickMax™ Knife Change System | |
| ShockPro™ Disc Drive Hub protection system | |
| MowMax™ 3-year cutterbar protection plan | |
| Chevron-Design Roll Conditioner | |
| Chevron-Design Roll Conditioner | |
| Type. | Choice of molded rubber or steel rolls |
| Roll Length, in. (mm) | 125 (3175) |
| Roll Diameter, in. (mm) | 10.4 (264) |
| Roll Drive | 4 HB V-belt and enclosed gears |
| Roll Speed, rpm | Two-Speed: 750 or 640 |
| Roll Pressure System | Torsion Bar |
| Conditioner Intensity Adjustment | Single crank adjustable roll pressure and two stop bolts to adjust roll gap |
| LeaningEdge™ Flail Conditioner | |
| LeaningEdge™ Flail Conditioner | |
| Number of LeaningEdge flails | 120 |
| Semi-Swinging LeaningEdge flail design | |
| Rotor Diameter, in. (mm) | 22 (560) |
| Standard Speed, rpm | 1042 |
| Optional Slow Speed, rpm | 752 |
| Drive. | 4 HB V-belt |
| Conditioner Intensity Adjustment. | Single crank adjustable rotor hood |
| Optional Textured Hood Liner Kit | |
| Attachment | |
| Standard Drawbar | - |
| Drawbar Swivel Hitch | |
| 2-pt Swivel Hitch | |
| Dimensions | |
| Height, Transport, ft. in. (m) | 7' 5" (2.26) |
| Height, Operating, ft. in. (m) | 6' 7" (2.01) |
| Width, Transport, ft. in. (m) | 16' 7" (5.05) |
| Width, Operating, Std. Drawbar Hitch, ft. in. (m) | - |
| Width, Operating 2-pt Swivel Hitch, ft. in. (m) | 25' 7" (7.8) |
| Width, Operating Drawbar Swivel Hitch, ft. in. (m) | 19' 7'' (6.0) |
| Length, Transport, Standard Drawbar Hitch, ft. in. (m) | - |
| Length, Transport, 2-pt Swivel Hitch, ft. in. (m) | 32' 0'' (9.7) |
| Length, Transport, Drawbar Swivel Hitch, ft. in. (m) | 31' 0'' (9.4) |
| Length, Operating, Standard Drawbar Hitch, ft. in. (m) | - |
| Length, Operating, 2-pt Swivel Hitch, ft. in. (m) | 26' 7'' (8.1) |
| Length, Operating Drawbar Swivel Hitch, ft. in. (m) | 25' 7'' (7.8) |
| Weight, Operating lbs. (kg) | 6,700 (3039) |
| Drive | |
| Drive | 1000 rpm PTO, enclosed gears and four HB belt |
| Drive Protection | |
| Drive Protection | Slip clutch and over-running clutch |
| Hydraulics | |
| Hydraulic swing | Standard (double-acting cylinder) |
| Operating Position | Center-Pivot, Right or Left Side |
| Hydraulic lift | Standard (operated by two single-acting cylinders; master/slave) |
| Hydraulic tilt | Standard (operated by single-acting cylinder and incorporated into the lift system) |
| Material Discharge | |
| Swath, ft. (mm) | 10 (3000) |
| Windrow, ft. (mm) | Adjustable from 3 to 8 (914 to 2400) |
| Wide Thin Fin Kit (100 % Coverage) | - |
| Speeds | |
| Operating, mph (kph) | 0 to 9 (0 to 14.5) |
| Transport, mph (kph) | 20 (32) |
| Tractor Requirement | |
| Tractor Requirement | 100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar. |
| Hydraulic valves | All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
| Tubeless Ag Rib Implement Tires | |
| Size | 12.5L x 15 8PR |
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide