New Holland H7320

New Equipment / New Holland Ag / Haytools & Spreaders / Discbine Disc Mower-Conditioners / H7320

H7320

Discbine Disc Mower-Conditioners

Features
Specs
Get A Quote
Send To A Friend

BUILT FOR FAST CUTTING AND QUICK DRYDOWN
Turn standing crop into fast-drying windrows or swaths with amazing speed using one of New Holland's Discbine® disc mower-conditioners. They slice through thick, tangled wet crops and mow through fire ant hills or gopher mounds without missing a beat. The Discbine line ranges from seven-disc models that cut a nine-foot swath up to 12-disc models that sweep through more than 15 feet at a time.

Model	H7320
New Holland-Disc Cutterbar
Type	MowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m)	9' 2" (2.8)
Number of discs	7
Number of knives	14 (2 per disc)
Disc Speed, rpm	3000
Cutting angle	2 to 10 degrees
Hydraulic Cutting angle control	Optional
Standard Cutting height skid shoe, in. (mm)	Standard 0.95 to 3.2 (24 to 81)
Fixed Raised, high- stubble skid shoe	Optional2.25-4.5 (57-114)
Adjustable Raised, high- stubble skid shoe	-
BioMass skid shoe	-
Ground clearance with header fully raised, in. (mm)	17" (432)
Cutterbar Flotation	Vertical and lateral, adjustable springs
QuickMax™ Knife Change System	-
ShockPro™ Disc Drive Hub protection system	Standard
MowMax™ 3-year cutterbar protection plan	Standard
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner	-
Type	-
Roll Length, in. (mm)	-
Roll Diameter, in. (mm)	-
Roll Drive	-
Roll Speed, rpm	-
Roll Pressure System	-
Conditioner Intensity Adjustment	-
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner	Standard
Number of LeaningEdge flails	90
Semi-Swinging Leaning Edge flail design	Standard
Rotor Diameter, in. (mm)	22 (560)
Standard Speed, rpm	1016
Optional Slow Speed, rpm	730
Drive.	4 BH V-belt
Conditioner Intensity Adjustment.	Single crank adjustable rotor hood
Optional Textured Hood Liner Kit	Optional
Attachment
Standard Drawbar	Standard
Drawbar Swivel Hitch	-
2-pt Swivel Hitch	-
Dimensions
Height, Transport, ft. in. (m)	5' 8" (1.7)
Height, Operating, ft. in. (m)	4' 5" (1.3)
Width, Transport, ft. in. (m)	9' 11" (3.0) with standard drawbar hitch
Width, Operating, Std. Drawbar Hitch, ft. in. (m)	14' 10" (4.52)
Width, Operating 2-pt Swivel Hitch, ft. in. (m	-
Width, Operating Drawbar Swivel Hitch, ft. in. (m)	-
Length, Transport, Standard Drawbar Hitch, ft. in. (m)	17' 7" (5.3)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)	-
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)	-
Length, Operating, Standard Drawbar Hitch, ft. in. (m)	17' 2" (5.2)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)	-
Length, Operating Drawbar Swivel Hitch, ft. in. (m)	-
Weight, Operating lbs. (kg)	3,740 (1696)
Drive
Drive	540 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive Protection	Slip clutch and over-running clutch
Hydraulics
Hydraulic swing	Standard (double-acting cylinder)
Operating Position	Side-Pull, Right Side
Hydraulic lift	Standard (operated by two single-acting cylinders; master/slave)
Hydraulic tilt	Optional (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm)	6 (1829)
Windrow, ft. (mm)	Adjustable from 3 to 6 (914 to 1829)
Wide Thin Fin Kit (100 % Coverage)	Optional
Speeds
Operating, mph (kph)	0 to 9 (0 to 14.5)
Transport, mph (kph)	20 (32)
Tractor Requirement
Tractor Requirement	65 PTO hp (48 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valves	All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size	9.5L x 14 6PR

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.