Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland SK230SRLC
SK230SRLC
SR Series
- Low Noise: iNDr - KOBELCO’s exclusive iNDr Cooling System delivers amazingly quiet operation
- More Work with Less Fuel! - The new hydraulic system and an additional ECO-mode have cut fuel consumption by up to 21%.
- Efficient Performance!
- Fast, Accurate and Low-Cost Maintenance - comfortable "On the Ground" maintenance
- A Working Environment that Helps Operator Concentrate on the Job - big cab, excellent visibility, wide-access cab aids smooth entry and exit,comfortable operating environment, ROPS cab,
| Model Name | SK230SRLC | |||||||
| Machine Type | SK230SRLC-3 | |||||||
| Operating Weight lbs {kg} | 55,100 {25,000} | |||||||
| Bucket | Bucket capacity SAE heaped cu.yd.{m3} | 0.67 {0.51} | 0.92 {0.70} | 1.05 {0.80} | 1.22 {0.93} | |||
| Bucket capacity SAE Struck cu.yd.{m3} |
0.51 {0.39} | 0.68 {0.52} | 0.77 {0.59} | 0.88 {0.67} | ||||
| Opening width With side cutter inches {mm} |
34 {870} | 43 {1,080} | 46 {1,160} | 52 {1,330} | ||||
| Opening width Without side cutter inches {mm} |
30 {770} | 39 {980} | 42 {1,060} | 48 {1,230} | ||||
| Bucket weight lb {kg} | 1,140 {520} | 1,390 {630} | 1,460 {660} | 1,570 {710} | ||||
| Engine | Model | HINO J05E | ||||||
| Type | Direct injection, water-cooled, 4-cycle diesel engine. With turbocharger, intercooler (Complies with EU (NRMM) Stage III B, US EPA Tier IV, and act on regulation, etc. of emission from non-road special motor vehicles (Japan)) | |||||||
| Rated power output | 166hp {124 kW}/2,000 rpm {-1} (ISO 14396) 157hp {117 kW} /2,000 rpm {-1} (ISO 9249) |
|||||||
| Fuel tank | 87.2 U.S.gal {330 L} | |||||||
| Swing System | Swing Speed | 13.3 rpm {min-1} | ||||||
| Travel System | Travel motors | 2 x axial-piston, two-step motors | ||||||
| Travel shoes | 49 each side | |||||||
| Travel speed | 3.7 / 2.2 mph {6.0 / 3.6 km/h} | |||||||
| Drawbar pulling force | 51,000 lbs {226.9 kN} (SAE J 1309) | |||||||
| Gradeability | 70% {35°} | |||||||
| Hydraulic System | Pump Type | Two variable displacement pumps | ||||||
| Max.discharge flow | 2 x 58.1 U.S.gph {2 x 220L/min} , 1 x 5.3 U.S.gph {1 x 20L/min} |
|||||||
| Hydraulic oil tank | 30.1 U.S.gal {114 L} tank oil level 60.8 U.S.gal {230 L} hydraulic system |
|||||||
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide